Showing all 5 results

  • Aquis™ Foam Proportioner

    $1.00
    Add to cart

    Aquis™ Foam Proportioner

    It’s not easy to properly proportion fire-suppressing foam. To get the ratios right, you need to compensate for a number of variables. Doing so demands world-class engineering coupled with dependable flow meter technology. In other words, you need The Aquis™ Foam Proportioner from Waterous. It delivers a level of performance and reliability typically reserved for more expensive foam proportioner systems.

    SKU: aquis Categories: ,
    $1.00
  • View Product Details
  • AQUIS™ ULTRAFLOW INDUSTRIAL FOAM PROPORTIONING SYSTEM

    $1.00
    Add to cart

    AQUIS™ ULTRAFLOW INDUSTRIAL FOAM PROPORTIONING SYSTEM

    Waterous AQUIS™ ULTRAFLOW is a high-capacity demand based concentrate proportioning system. ULTRAFLOW is compatible with all current AFFF and non-fluorinated concentrates and utilizes magnetic flowmeters for precision concentrate to water ratio-control accurate within 2% over the full calibrated concentrate pump operating range. Electronic closed loop measurement and control of the concentrate injection rate relative to water flow provides precise concentrate to water ratios at up to sixteen (16) independent solution capable discharges.

    SKU: 93ultraflow Categories: , ,
    $1.00
  • View Product Details
  • FireTroll

    $1.00
    Add to cart

    FireTroll

    The Waterous Fire Troll Foam Proportioning System is an easy to operate system that can be inserted in the plumbing between the pump outlet and the live reel or other discharge points on the fire engine or can be inserted in a hose lay at any location.

    SKU: firetroll Categories: ,
    $1.00
  • View Product Details
  • FoamFill Foam Tank Refill System

    $1.00
    Add to cart

    FoamFill Foam Tank Refill System

    The Waterous FoamFill™ Foam Tank Refill System is completely-automated, making it easier, safer, cleaner and quicker to top off the foam tank or tanks in your apparatus.Waterous FoamFill™ Foam Tank Refill System can be used with both Class A and B foam. When turned on, a microcontroller inside the FoamFill™ identifies the foam levels in the tank or tanks. If the levels are low, FoamFill™ automatically fills them without overflowing, operating at a capacity of 10 GPM (37.8 L/min.).

    SKU: FoamFill Category:
    $1.00
  • View Product Details
  • Placeholder

    RTP Foam System

    $1.00
    Add to cart

    RTP Foam System

    The Waterous Around-The-Pump (RTP) Foam System is a simple and inexpensive way to add foam capability to all discharges of the fire pump. The Waterous RTP Foam System consists of an eductor (jet pump) and panel mounted foam proportioning valve. A table on the foam control panel makes setting the proportioner for 1, 3 and 6% foam easy and accurate.

    SKU: sku_78 Category:
    $1.00
  • View Product Details