-
Venturis Industrial Air Primer
$1.00 Add to cartVenturis Industrial Air Primer
The basic system consists of two Venturis air primers, two priming valves, an auto or manual-prime control panel, and a compressed air supply equipped with a pressure protection valve. Additional components, or a combination of components, allow you to operate the system from multiple locations and prime multiple locations individually or simultaneously.
$1.00
View Product Details
-
AQUIS™ ULTRAFLOW INDUSTRIAL FOAM PROPORTIONING SYSTEM
$1.00 Add to cartAQUIS™ ULTRAFLOW INDUSTRIAL FOAM PROPORTIONING SYSTEM
Waterous AQUIS™ ULTRAFLOW is a high-capacity demand based concentrate proportioning system. ULTRAFLOW is compatible with all current AFFF and non-fluorinated concentrates and utilizes magnetic flowmeters for precision concentrate to water ratio-control accurate within 2% over the full calibrated concentrate pump operating range. Electronic closed loop measurement and control of the concentrate injection rate relative to water flow provides precise concentrate to water ratios at up to sixteen (16) independent solution capable discharges.
$1.00
View Product Details
-
CRU-2 High Flow Series Pump
$1.00 Add to cartCRU-2 High Flow Series Pump
Waterous CRU-2 single-stage centrifugal high-flow pump mated to C23 or QC chain-driven transmission or driven by a TC23 split-shaft PTO can be utilized in municipal firefighting, aircraft firefighting, dewatering or for industrial applications.
$1.00
View Product Details
-
CM-CMU – Decoking / Descaling
$1.00 Add to cartCM-CMU – Decoking / Descaling
Decoking/Descaling – The continuous build-up of coke on the inner walls of fired heaters and heat exchange surfaces in oil refineries leads to reduced energy efficiency and shutdown of the affected unit. To clean the walls, a device called a pig is sent through the pipeline with high pressure water. The water that forces the pig through the pipeline is the CM/CMU Series Pump. The CM/CMU pump is the only centrifugal pump in the industry that can withstand the wear and tear of decoking/descaling.
$1.00
View Product Details
-
CPT-4 – Power Line Insulator Washing
$1.00 Add to cartCPT-4 – Power Line Insulator Washing
Hot Line Insulator Washing – Hot Line Washing is basically a procedure where insulators on electrical lines are cleaned with water while the electricity is energized (on). If the insulators are not cleaned, a flashover may occur causing brownouts, blackouts and damaged equipment. The Waterous CPT-4 pump is an ideal solution for hot line insulator washing. With pressures up to 800 PSI (55 bar), the insulators can be cleaned while power is still supplied to customers.
$1.00
View Product Details
-
TMR – Reversing Transmission for Hi-Rail Applications
$1.00 Add to cartTMR – Reversing Transmission for Hi-Rail Applications
To show the diversity of Waterous products, we developed a transmission for a vehicle which can operate both on rail tracks and a conventional road. The Hi-Rail, from highway and rail equipped with a Waterous TMR Transmission allows the vehicle to travel forward or backwards without having to change the vehicle’s transmission setting saving wear and tear on the vehicle transmission.
$1.00
View Product Details
