-
CXT
$1.00 Add to cartCXT
The CXT is a single-stage end suction pump that is direct-engine mounted via a T Series Transmission.
$1.00
View Product Details
-
CLT
$1.00 Add to cartCLT
The CL Series is a one-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.
The T Series Transmission uses an SAE bellhousing to mount the pump directly to the engine.
$1.00
View Product Details
-
CGT
$1.00 Add to cartCGT
The CGT is a single stage design with vertically-split volute and pump transmission providing simple operation, easy maintenance and high reserve capacity.
The T Series Transmission uses an SAE bellhousing to mount the pump directly to the engine.
$1.00
View Product Details
-
CPT-2
$1.00 Add to cartCPT-2
The CPT-2 is a singe-stage pumps that are able to accommodate multiple lines for straight stream or fog nozzles.
The T Series Transmission uses an SAE bellhousing to mount the pump directly to the engine.
$1.00
View Product Details
-
CPT-3
$1.00 Add to cartCPT-3
The CPT-3 is a compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires.
The T Series Transmission uses an SAE bellhousing to mount the pump directly to the engine.
$1.00
View Product Details
-
CPT-4
$1.00 Add to cartCPT-4
The CPT-4 is an ultra high-pressure, lightweight, 4-stage centrifugal pump, able to produce high-pressure fog while the pumper is in motion or stationary.
The T Series Transmission uses an SAE bellhousing to mount the pump directly to the engine.
$1.00
View Product Details
-
TC22 / TC23 Power Take-Off
$1.00 Add to cartTC22 / TC23 Power Take-Off
The Waterous TC22 / TC23 Series Power Take-Off (PTO) enables a fire pump to be rear mounted in an apparatus. The TC22 / TC23 transmits power from the apparatus’ automatic transmission to the drive axle of the vehicle when in Road Mode or when shifted to PTO Mode, transmits power to the rear-mounted fire pump via a PTO-Drive shaft.
$1.00
View Product Details
-
CSD / CSUD
$1.00 Add to cartCSD / CSUD
The leading single-stage split-shaft fire pump on the market today is available as a direct drive pump providing efficient use of power and performance. Designed with a two piece, horizontally split body with intake and discharge passageways in a single casting and on the same level, this pump provides the lowest possible height, a lower center of gravity, and more room for hose reels, hose beds and other equipment.
When used with a TC22 Series Power Take-Off (PTO), the CS / CSU can be rear-mounted in an apparatus.
$1.00
View Product Details
-
CMD / CMUD
$1.00 Add to cartCMD / CMUD
The low profile midship two-stage series/parallel pump with ball-type transfer valve allows you to switch from pressure to volume smoothly & easily.
When used with a TC22 Series Power Take-Off (PTO), the CM / CMUD can be rear-mounted in an apparatus.
$1.00
View Product Details
-
CXD / CXSD
$1.00 Add to cartCXD / CXSD
The CX / CXS Series Pump is the most versatile pump offered by Waterous. When you need the performance of a larger split-shaft pump, but just don’t have the compartment space, the CX / CXS is the answer.
When used with a TC22 Series Power Take-Off (PTO), the CX / CXS can be rear-mounted in an apparatus.
$1.00
View Product Details
-
HLUD
$1.00 Add to cartHLUD
The compact, simultaneous High/Low pressure series pump from Waterous is ideal for an urban interface vehicle or wildland firefighting The HLUD is available in ratings of 1000, 1250 and 1500 GPM @ 150 PSI (4000, 5000 and 5600 L/min @ 10 bar).
$1.00
View Product Details
-
S100D
$1.00 Add to cartS100D
Get the power and performance of a traditional midship fire pump in a compact, lightweight direct-engine mounted pump. Made of ductile iron, the S100D is nearly 35% lighter, and yet 25% stronger than identical pumps made with gray iron.
When used with a TC22 Series Power Take-Off (PTO), the S100 can be rear-mounted in an apparatus.
$1.00
View Product Details
-
HL200
$1.00 Add to cartHL200
Specifically designed for installation in international-style fire trucks, the compact, rear-mounted HL series pumps have built-in high-pressure relief valves. The HL200 has ratings from 2000 L/min. @ 10 bar (low pressure) to 400 L/min. @ 40 bar (high pressure).
$1.00
View Product Details
-
HL300
$1.00 Add to cartHL300
Specifically designed for installation in international-style fire trucks, the compact, rear-mounted HL series pumps have built-in high-pressure relief valves. The HL300 has ratings from 3000 L/min. @ 10 bar (low pressure) to 400 L/min. @ 40 bar (high pressure).
$1.00
View Product Details
-
HL400
$1.00 Add to cartHL400
Specifically designed for installation in international-style fire trucks, the compact, rear-mounted HL series pumps have built-in high-pressure relief valves. The HL400 has ratings of 4000 L/min @ 10 bar (low pressure) to 400 L/min. @ 40 bar (high pressure). All HL models provide brigades with rear-mount pumps capable of simultaneously producing high pressure and low pressure.
$1.00
View Product Details
-
S200
$1.00 Add to cartS200
The S200 fire pump was designed by Waterous engineers to provide the utmost quality and reliability that comes with the Waterous name. With the goal of reaching international standards, the S200 accomplished that goal by meeting EN 1028, NFPA 1900 (North America) and CCC in China. The S200 is quieter, lighter and more flexible than any other fire pump on the market today. You can rest assured that the dependability and quality of the S200 is guaranteed by a 5-Year Limited Warranty.
$1.00
View Product Details
