Showing 17–32 of 81 results

  • 1000-100, 1000-150, 1250-100, 1250-150-P

    $1.00     Add to cart

    1000-100, 1000-150, 1250-100, 1250-150-P

    Part pump, part compressor, all CAFS fire suppressing power. Waterous has several PTO-driven Integrated Pump/Compressor Systems available to meet your department’s needs. These models deliver everything you’d expect in a CAFS unit, including the ability to discharge water, foam solution and compressed air for pneumatic tools. They also include a rotary screw airend with poly-chain.

    SKU: sku_66 Categories: ,
    $1.00
    • View Product Details

  • CSC22 / CSUC22

    $1.00     Add to cart

    CSC22 / CSUC22

    Designed with a two-piece, horizontally-split body with intake and discharge passageways in a single casting and on the same level. This design provides the lowest possible height, a lower center of gravity and more room for hose reels, hose beds and other equipment.

    The CS/CSU Split-Shaft model is equipped with a chain-driven C22 Transmission. The C22 Transmission provides the best In-Class power transfer. The silent chain drive provides no gear whining, provides positive shifting and requires less horsepower that will enhance the efficiency of the apparatus.

    SKU: sku_1 Categories: , , ,
    $1.00
    • View Product Details

  • 1000-200-DC

    $1.00     Add to cart

    1000-200-DC

    Waterous 1000-200-DC and 1250-200-DC integrated crossmount centrifugal pumps blend the speed and effectiveness of CAFS with true pump-and-roll capabilities. Designed for transverse mounting within a pump compartment, the engine pump and air compressor are integrated as a single, skid−mounted unit. Available flows from 1000 GPM (3800 L/min.) up to 1250 GPM (4750 L/min.) and air capacity of 200 SCFM (5.6 m3/min).

    SKU: sku_40 Categories: ,
    $1.00
    • View Product Details

  • CMC22 / CMUC22

    $1.00     Add to cart

    CMC22 / CMUC22

    The low profile split-shaft two-stage series/parallel pump with ball-type transfer valve allows you to switch from pressure to volume smoothly & easily.

    The CM/CMU Split-Shaft model is equipped with a chain-driven C22 Transmission. The C22 Transmission provides the best In-Class power transfer.The silent chain-drive provides no gear whining, provides positive shifting and requires less horsepower that will enhance the efficiency of the apparatus.

    SKU: sku_2 Categories: , , , ,
    $1.00
    • View Product Details

  • 1250-200-DC

    $1.00     Add to cart

    1250-200-DC

    Waterous 1000-200-DC and 1250-200-DC integrated crossmount centrifugal pumps blend the speed and effectiveness of CAFS with true pump-and-roll capabilities. Designed for transverse mounting within a pump compartment, the engine pump and air compressor are integrated as a single, skid−mounted unit. Available flows from 1000 GPM (3800 L/min.) up to 1250 GPM (4750 L/min.) and air capacity of 200 SCFM (5.6 m3/min).

    SKU: sku_41 Categories: ,
    $1.00
    • View Product Details

  • CXC22 / CXSC22

    $1.00     Add to cart

    CXC22 / CXSC22

    The most versatile pump offered by Waterous. When you need the performance of a larger split-shaft pump, but just don’t have the compartment space, the CX/CXS is the answer.

    The CX/CXS Split-Shaft model is equipped with a chain-driven C22 Transmission. The C22 Transmission provides the best In-Class power transfer.The silent chain-drive provides no gear whining, provides positive shifting and requires less horsepower that will enhance the efficiency of the apparatus.

     

    SKU: sku_3 Categories: , , ,
    $1.00
    • View Product Details

  • S100C22 / S101C22

    $1.00     Add to cart

    S100C22 / S101C22

    Get the power and performance of a traditional midship fire pump in a compact, lightweight design. Made of ductile iron, the S100 are nearly 35% lighter, and yet 25% stronger than identical pumps made with gray iron. Available as a direct-engine mount or matched with a Waterous aluminum case transmission.

    The S100/S101 Split-Shaft model is equipped with a chain-driven C22 Transmission. The C22 Transmission provides the best In-Class power transfer. The silent chain-drive provides no gear whining, provides positive shifting and requires less horsepower that will enhance the efficiency of the apparatus.

     

    SKU: sku_4 Categories: , , ,
    $1.00
    • View Product Details

  • 500-140-DC

    $1.00     Add to cart

    500-140-DC

    The Waterous 500-140-DC integrated crossmount CAFSystems™ combine the engine, transmission, water pump and air compressor into one, single, skid−mounted CAFS unit packed with powerful fire suppression capabilities for any size department.

    SKU: sku_39 Categories: ,
    $1.00
    • View Product Details

  • Aquis™ Foam Proportioner

    $1.00     Add to cart

    Aquis™ Foam Proportioner

    It’s not easy to properly proportion fire-suppressing foam. To get the ratios right, you need to compensate for a number of variables. Doing so demands world-class engineering coupled with dependable flow meter technology. In other words, you need The Aquis™ Foam Proportioner from Waterous. It delivers a level of performance and reliability typically reserved for more expensive foam proportioner systems.

    SKU: aquis Categories: ,
    $1.00
    • View Product Details

  • AQUIS™ ULTRAFLOW INDUSTRIAL FOAM PROPORTIONING SYSTEM

    $1.00     Add to cart

    AQUIS™ ULTRAFLOW INDUSTRIAL FOAM PROPORTIONING SYSTEM

    Waterous AQUIS™ ULTRAFLOW is a high-capacity demand based concentrate proportioning system. ULTRAFLOW is compatible with all current AFFF and non-fluorinated concentrates and utilizes magnetic flowmeters for precision concentrate to water ratio-control accurate within 2% over the full calibrated concentrate pump operating range. Electronic closed loop measurement and control of the concentrate injection rate relative to water flow provides precise concentrate to water ratios at up to sixteen (16) independent solution capable discharges.

    SKU: 93ultraflow Categories: , ,
    $1.00
    • View Product Details
  • VENTURIS

    Venturis Air Primer

    $1.00     Add to cart

    Venturis Air Primer

    An air primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. 

    SKU: sku_96 Category:
    $1.00
    • View Product Details

  • Electric Priming Systems

    $1.00     Add to cart

    Electric Priming Systems

    Priming Systems consists of a VPO electric motor driven rotary vane, oil-less primer mounted directly on a Waterous midship pump transmission or separately mounted. With the priming valve, it forms a complete, dependable, factory installed priming system.

    SKU: sku_63 Category:
    $1.00
    • View Product Details

  • Intake and Discharge Valves

    $1.00     Add to cart

    Intake and Discharge Valves

    Waterous discharge valves trunnion design allows the ball of the valve to remain centered in the valve body via a hydraulically-balanced floating seal assembly with urethane seal. Seal compresses to the surface of the ball via a wave spring to keep uniform pressure ensuring a positive seal, self-adjusting for wear, prevents leakage under high pressure and assures easy operation. No need to add or remove shims or make adjustments to correct wear.

    SKU: sku_70 Category:
    $1.00
    • View Product Details

  • Pressure Control Systems

    $1.00     Add to cart

    Pressure Control Systems

    The Waterous Intake Relief Valve system is designed to act as a safety valve by “dumping” excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.

    SKU: sku_69 Category:
    $1.00
    • View Product Details

  • Overheat Protection Manager (OPM)

    $1.00     Add to cart

    Overheat Protection Manager (OPM)

    The Waterous Overheat Protection Manager (OPM) acts as a safety device by releasing water from the discharge side of the pump to the ground or back to a water tank once the internal pump water temperature reaches 140°F (60°C).

    SKU: sku_67 Category:
    $1.00
    • View Product Details

  • Fittings – Intake, Discharge and Auxiliary

    $1.00     Add to cart

    Fittings – Intake, Discharge and Auxiliary

    Waterous pumps are available with a variety of intake, discharge and auxiliary fittings. Check the Download section below to find the right fittings for your application.

    SKU: sku_71 Category:
    $1.00
    • View Product Details