-
Drain Valves
$1.00 Add to cartDrain Valves
Clean up after a fire is hard work. The team at Waterous understands that. Waterous works to make it easier for you and your team.
The Waterous drain valve is made of stainless steel and a bronze body and allows for simultaneous draining of eight lines!
Simple operation, easier clean up, Waterous’ drain valves are just a click away!
$1.00
View Product Details
-
Power Shift
$1.00 Add to cartPower Shift
Looking to do fast positive shifting while still in the cab? Take a look at the Power Shift.
It includes a complete set of indication lights, in accordance with NFPA 1900. These lights indicate when the shift has been completed to PUMP and OK TO PUMP.
The units also include a manual override provision which allows the pump to be engaged manually in case of an electrical or air system failure.
$1.00
View Product Details
-
Anodes – Cathodic Protection
$1.00 Add to cartAnodes – Cathodic Protection
Galvanic corrosion is huge problem in the water industry. Anytime two different metals are immersed in water and physically or electrically connected a “battery” is formed, as a small amount of current will flow between the two metals. The solution? Cathodic protection. Waterous offers optional corrosion protection with magnesium anodes and zinc intake screens. Click to learn more now and save your parts from galvanic corrosion!
$1.00
View Product Details
-
Auto Tank Fill
$1.00 Add to cartAuto Tank Fill
Do you have an operator constantly monitoring your water tank, and concerns of high hydrant pressure?
Free up your operator and stop being concerned with high hydrant pressure with the Waterous Auto Tank Fill System!
Waterous designed this system to solve both of these problems, and it maintains a constant low pressure water supply at the pump intake by automatically filling the water tank and maintaining a water level between 20 and 80%.
The Auto Tank Fill is designed for any of the Waterous electric-actuated ball valves (sold separately).
$1.00
View Product Details
-
CGC22
$1.00 Add to cartCGC22
The single stage design with vertically-split volute and pump transmission provides simple operation, easy maintenance and high reserve capacity.
The CG Split-Shaft model is equipped with a chain-driven C22 Transmission. The C22 Transmission provides the best In-Class power transfer. The silent chain-drive provides no gear whining, provides positive shifting and requires less horsepower that will enhance the efficiency of the apparatus.
$1.00
View Product Details
-
CRU-2 High Flow Series Pump
$1.00 Add to cartCRU-2 High Flow Series Pump
Waterous CRU-2 single-stage centrifugal high-flow pump mated to C23 or QC chain-driven transmission or driven by a TC23 split-shaft PTO can be utilized in municipal firefighting, aircraft firefighting, dewatering or for industrial applications.
$1.00
View Product Details
-
CXK / CXPA
$1.00 Add to cartCXK / CXPA
The CX series is a single-stage, end-suction pump that is driven by a transmission side-mounted PTO or a chain-driven transmission.
The PTO-Driven CX Series is available with a K-Series, gear-driven transmission designed for use with a side-mounted PTO or a PA Series, chain-driven transmission designed for use with an Allison Transmission with 10-bolt PTO.
$1.00
View Product Details
-
CSK / CSPA / CSUK / CSUPA
$1.00 Add to cartCSK / CSPA / CSUK / CSUPA
The leading single-stage split-shaft fire pump on the market today provides efficient use of power and performance. Designed with a two-piece, horizontally split body with intake and discharge passageways in a single casting and on the same level, this pump provides the lowest possible height, a lower center of gravity, and more room for hose reels, hose beds and other equipment.
The PTO-Driven CS / CSU Series is available with a K-Series, gear-driven transmission designed for use with a side-mounted PTO or a PA Series (K and PA Transmissions limited to 1500 Max Rating on CSU Series), chain-driven transmission designed for use with an Allison Transmission with 10-bolt PTO.
$1.00
View Product Details
-
CMK / CMUK / CMPA / CMUPA
$1.00 Add to cartCMK / CMUK / CMPA / CMUPA
The low profile two-stage series/parallel pump with ball-type transfer valve allows you to switch from pressure to volume smoothly & easily.
The PTO-Driven CM / CMU Series is available with a K-Series, gear-driven transmission designed for use with a side-mounted PTO or a PA Series, chain-driven transmission designed for use with an Allison Transmission with 10-bolt PTO.
$1.00
View Product Details
-
HLUK / HLUPA
$1.00 Add to cartHLUK / HLUPA
The compact, simultaneous High/Low pressure series pump from Waterous is ideal for an urban interface vehicle or wildland firefighting The HLUK / HLUPA is available in ratings of 1000, 1250 and 1500 GPM @ 150 PSI (4000, 5000 and 5600 L/min @ 10 bar).
$1.00
View Product Details
-
CLK /CLPA
$1.00 Add to cartCLK /CLPA
The CLK / CLPA offers a one-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.
The PTO-Driven CL Series is available with a K-Series, gear-driven transmission designed for use with a side-mounted PTO or a PA Series, chain-driven transmission designed for use with an Allison Transmission with 10-bolt PTO.
$1.00
View Product Details
-
CGK /CGPA
$1.00 Add to cartCGK /CGPA
The single stage design with vertically-split volute and pump transmission provides simple operation, easy maintenance and high reserve capacity.
The PTO-Driven CG Series is available with a K-Series, gear-driven transmission designed for use with a side-mounted PTO or a PA Series, chain-driven transmission designed for use with an Allison Transmission with 10-bolt PTO.
$1.00
View Product Details
-
CM/CGV, CMU/CGV Hi-Rise Pumps
$1.00 Add to cartCM/CGV, CMU/CGV Hi-Rise Pumps
The CM/CGV and CMU/CGV pumps can operate as a stand-alone CM, CMU pump or adding the high pressure CGV pump in series provides the added performance needed to fight a high rise fire.
$1.00
View Product Details
-
CM-CMU – Decoking / Descaling
$1.00 Add to cartCM-CMU – Decoking / Descaling
Decoking/Descaling – The continuous build-up of coke on the inner walls of fired heaters and heat exchange surfaces in oil refineries leads to reduced energy efficiency and shutdown of the affected unit. To clean the walls, a device called a pig is sent through the pipeline with high pressure water. The water that forces the pig through the pipeline is the CM/CMU Series Pump. The CM/CMU pump is the only centrifugal pump in the industry that can withstand the wear and tear of decoking/descaling.
$1.00
View Product Details
-
CPK-2
$1.00 Add to cartCPK-2
The CPK-2 is driven by a K Series Transmission side mounted PTO and is able to accommodate multiple lines for straight stream or fog nozzles.
$1.00
View Product Details
-
CPK-3
$1.00 Add to cartCPK-3
The CPK-3 is a compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires. Equipped with a K-Series, gear-driven transmission designed for use with a side-mounted PTO.
$1.00
View Product Details